4" Nose Cone
Same day dispatch if ordered before 2pm.
4" Flue Liner Nose Cone
Used to pull you flue liner down the chimney, the nose cone is tapered and smooth and has a hole in the tip to attach a length of string/rope or cord (not supplied) to allow an easy pull down the chimney.
These are made from aluminium.
Type | Accessories |
---|---|
Material | Aluminum |
External Diameter | 100mm |
Place on the bottom end of the chimney liner using gaffer or duct tape to assist when feeding the liner down the chimney.
A drawstring (not supplied) will also need to be put through the hole of the nose cone, the length of rope/cord must be the length of the stack, to assist the installation.
BUILDING REGULATIONS
Download Building Regulations Document J (effective October 2010) below
(Right click link, then select "save file as..")