Floor Ventilator with Chrome Louvre
£32.34 £38.81
In stock
SKU
AIR04
- Room ventilator utilising air from a ventilated sub-floor void.
- Mirror stainless steel louvre grille provides a stylish appearance.
- Inverted louvres give a flush finish.
- Co-ordinating screws included.
Floor Ventilator with Chrome Louvre
- Room ventilator utilising air from a ventilated sub-floor void.
- Mirror stainless steel louvre grille provides a stylish appearance.
- Inverted louvres give a flush finish.
- Co-ordinating screws included.
Free Area:
- 11,000mm² (110cm²) per vent.
267mm L x 95mm H x 125mm D
| Type | Accessories |
|---|
Installation Guide
- Cut an opening in the floor and insert the sleeve (sleeve can be trimmed with a fine tooth saw to reduce the depth if required). Fasten the louvre to the sleeve through the pre-formed holes using the screws provided. Peel off the protective film.
- Note: When installing in an uncarpeted floor the flange may be trimmed and the louvre ventilator screwed to the floor to maintain as flush a finish as possible.
- Important: In areas where radon gas has been identified as a problem, ventilation shall not be taken from the space below ground floor level (e.g. using a floor vent), or interfere in any way with any remedial measures already in place to prevent radon gas entering the habitable part of the dwelling.
BUILDING REGULATIONS
Download Building Regulations Document J (effective October 2010) below
(Right click link, then select "save file as..")