6" 250mm Length With Test Point
- 10 Years Warranty
- 250mm Test Point Length
- Black Vitreous Enamel Coating
6" 250mm Length Stove Pipe With Test Point
This short, 250mm pipe can be fitted to any freestanding stove and is used to test your installation.
Vitreous Stove Pipe is generally used to connect from your stove or appliance to either Flexible Flue liner or Twin Wall Insulated Flue.
|Construction||1.2mm Steel, Vitreous Enamel Black Coating|
|Designation||EN 1856-2 T600 N1 W V2 L80100 G450NM|
|Fuels||Gas, Oil, Solid Fuels, Wood, Pellets, Peat|
Remove Cap screw, Insert probe for gas analyser or draught meter. Once test is complete please replace the cap.
Vitreous should always be installed 3 x the internal diameter away from any combustible materials.
Stove pipe should only be used as a connection piece and never used externally on any property.
Our stove pipe has a compression fit but we would always advise to use a thin layer of fire cement on each joint.
Download Building Regulations Document J (effective October 2010) below
(Right click link, then select "save file as..")