5" Double Socket Adaptor Stove Pipe
- Premium Vitreous Enamel
- Connect Cut Down Stove Pipe
- Extremely High Resistence to Heat
5" Double Socket Adaptor For Stove Pipe
Stove Pipe Double socket adaptor is used when once piece of your Stove pipe has been cut down, This adaptor will then enable you to connect your cut section of Stove Pipe to your uncut section of Stove pipe .
Never cut the Female Socket off your Stove Pipe.
You will need to use an adaptor to connect your Stove pipe
Type | Adaptor |
---|---|
Material | Stainless Steel |
Construction | Manufactured in accordance with ISO9001-2008 using 1mm low carbon steel |
Designation | EN 1856-2 T600 N1 D Vm L80060 G375 NM |
Internal Diameter | 125mm |
Fuels | Oil, gas and Solid Fuels, for domestic heating appliances |
Installation Guide
Vitreous should always be installed 3 x the internal diameter away from any combustible materials.
Stove pipe should only be used as a connection piece and never used externally on any property.
Our stove pipe has a compression fit but we would always advise to use a thin layer of fire cement on each joint.
BUILDING REGULATIONS
Download Building Regulations Document J (effective October 2010) below
(Right click link, then select "save file as..")