Fire Rope Adhesive
- 50ml Bottle
- Solvent Free
- Easy to use nozzle
- Black When Set
Fire Rope Adhesive / Glue
The Rope Glue is black to ensure limited visible impact, unlike our competitors who tend to sell white adhesive.
Used to secures fire rope either onto your stove or to vitreous flue pipe where additional packing out is required.
- 50ml Bottle
- Solvent Free
- Easy to use nozzle
- Black when Set
Type | Accessories |
---|---|
Construction | no solvent adhesive glue |
Installation Guide
Remove the door from the stove (if possible) and lay on a flat surface. Ensure that the groove you plan to place the glue and rope into is free from grease, dirt and any residual glue from the last time. Apply the adhesive to the groove (not the rope) and press the rope seal firmly into place. Should you make a mistake simply pull out the rope seal and start again.
Allow 15 minutes before re-attaching the door and shutting it, once ready fire up your appliance and the heat will let the glue set.
BUILDING REGULATIONS
Download Building Regulations Document J (effective October 2010) below
(Right click link, then select "save file as..")