Product Catalogues
Twin Wall System
Twin-wall is suitable for burning all types of fuel in situations where a chimney system is needed to go either on the outside of a building or to be built inside where there is not an existing chimney stack. Jeremias use a “push-fit” system for their rigid pipe where each component pushes into the following piece and a locking band (provided with all lengths, bends and adaptors) goes around the joint. O-rings are available for condensing purposes.
All of Jeremias products have been HETAS approved and quality tested.
Twin Wall System - Commercial Sizes
Twin-wall is suitable for burning all types of fuel in situations where a chimney system is needed to go either on the outside of a building or to be built inside where there is not an existing chimney stack. Jeremias use a “push-fit” system for their rigid pipe where each component pushes into the following piece and a locking band (provided with all lengths, bends and adaptors) goes around the joint. O-rings are available for condensing purposes.
All of Jeremias products have been HETAS approved and quality tested.
Ultraflex Stainless Steel
Our ULTRAFLEX liners are all of stainless steel twin-lined grade 1 quality and produced to the highest of standards. The liners are designed to withstand high temperatures and has a good resistance to corrosion. We produce different liners; 316L/316L and 904/904, each designed to perform under various circumstances depending on the types of fuel used.
We also stock a wide range of fittings to use in the installation of our liners. All of our flexible liner products are of the highest quality and a variety are available to suit the individual needs of the customer.
316 1mm Stainless Steel
The 316 stainless steel is designed primarily for high temperature applications in the domestic market for gas, oil, solid and multi-fuel installations.
The 316 flue pipe is a range of prefabricated Stainless Steel Single Wall flue and vent systems. The 1mm product have a dull 2B finish. Lengths and fittings have a quick and easy to use socket and spigot jointing system which is leak proof when sealed and installed as recommended. Locking
316 0.6mm Stainless Steel (Condensing)
The 316 stainless steel is designed primarily for high temperature applications in the domestic market for gas, oil, solid and multi-fuel installations.
The 316 flue pipe is a range of prefabricated Stainless Steel Single Wall flue and vent systems. The 1mm product have a dull 2B finish. Lengths and fittings have a quick and easy to use socket and spigot jointing system which is leak proof when sealed and installed as recommended. Locking
Vitreous Enamel Stove Pipe
Our flue pipes come in a number of sizes- 4, 5, 6, 7 and 8 inch diameters-so whatever size your stove requires, you will be able toeasily find a solution. You can also choose from a variety of lengths and bends so you can construct pipework for any situation. Choose from 15°, 30°, 45° and 90° bends as well as T-shaped junctions. Available with or without access sweeping doors.
Manufactured in accordance with ISO9001-2008 using 1mm low carbon steel. Suitable for oil, gas and Solid Fuels, for domestic heating appliances. Finished products have an internal and external vitreous enamel coating to offer extremely high resistance to heat and toxic or corrosive gasses meeting with the requirements of BSEN ISO 28706 - 1:2011.