Rapid Flash - Self Adhesive Roof Flashing
£101.42 £121.70
In stock
SKU
DRF108GB
- Unique stretchable Base to fit any roof profile.
- Easy to install
- Market leading sealing system
- UV rated
- 175mm - 350mm
- Suitable for Metal & Tile Roofs
Rapid Flash Lead Free Roof Flashing
Rapid flash is designed to replace traditional lead based flashing but incorporating a clever designed mesh that is free from toxic materials.
Rapid Flash can be used on tile or metal roofs whilst incorporating a paintable surface that can be adapted to any roof colour.
Features:
- Unique stretchable Base to fit any roof profile.
- Easy to install
- Market leading sealing system
- UV rated
- 175mm - 350mm
- Suitable for Metal & Tile Roofs
Pitch: 0° - 40°
Base Size: 560mm x 850mm
Suitable for Pipe Sizes: 175mm - 330mm
| Type | Roof Flashings |
|---|---|
| Construction | mesh encased in a non-toxic rubber polymer. |
Installation Directions
- Trim the Rubber Boot to suite your Pipe Size. Ensure surface is clean and dry before application.
- Remove the middle underside backing strip and slide the flashing.
- For Tiled Roofs, remove the top backing strip and fold 5-10mm of the top of the flashing up over itself to create a dam and affix under the upstream tile.
- For metal Roofs, remove the top backing trip and press down
- Remove the bottom backing strip and dress the base firmly
- To finish, remove the protective film on the top of the roof flashing
BUILDING REGULATIONS
Download Building Regulations Document J (effective October 2010) below
(Right click link, then select "save file as..")