7" Nose Cone
7" Flue Liner Nose Cone
Used to pull you flue liner down the chimney, the nose cone is tapered and smooth and has a hole in the tip to attach a length of string/rope or cord (not supplied) to allow an easy pull down the chimney.
These are made from aluminium.
Type | Accessories |
---|---|
Material | Aluminum |
Installation Guide
Place on the bottom end of the chimney liner using gaffer or duct tape to assist when feeding the liner down the chimney.
A drawstring (not supplied) will also need to be put through the hole of the nose cone, the length of rope/cord must be the length of the stack, to assist the installation.
BUILDING REGULATIONS
Download Building Regulations Document J (effective October 2010) below
(Right click link, then select "save file as..")