Firestorm 1.5M Phoenix Eco Advanced Patio Heater & Pellet Stove
Experience warmth and ambience with the Firestorm Heater — an eco-friendly patio heater that delivers stunning 1.5 m flames using clean-burning wood pellets. Easy to light, simple to maintain, and perfect for elevating any outdoor evening.
Bring unforgettable warmth and atmosphere to your outdoor space with the Firestorm Heater. Designed for both style and sustainability, this innovative heater runs on eco-friendly wood pellets, producing a mesmerising flame that reaches the full height of its 1.5 m tube in just 15 minutes.
Enjoy over an hour of captivating fire from a single load, and effortlessly extend the burn time by adding more pellets as needed. The Firestorm Heater is simple to ignite and naturally self-extinguishes as your evening comes to an end, offering convenience and peace of mind.
Each unit includes 5 kg of wood pellets to get you started, along with a complete cleaning kit to help you keep your Firestorm in pristine condition.
Perfect for patios, gatherings, and memorable nights outdoors.
| Fuels | Pellet |
|---|
- Place the Firestorm body upside down on a soft flat surface and lean the round face against a soft edge to keep the Firestorm body upright.
- Insert the M8 bar into the thread plate on the bottom of the Firestorm body by turning clockwise, ensure it is fully threaded into the body before proceeding.
- Place the support post onto the Firestorm body with the castellation filled through the slots.
- Carefully place the base plate onto the support post ensuring the castellation and M8 bar fit through the plate and it sits securely.
- Place the M8 washer over the M8 bar and onto the base plate, hand thread the M8 nut onto the M8 bar and tighten clockwise with a 13mm spanner, ensure the blue side of the nut faces up. Note: Take care not to over tighten the nut. Only tighten until there are no gaps between the nut, washer and base plate. Tightening beyond this point risks damage to the Firestorm.
- With the Firestorm still upside down, insert an M6 bolt through a hole located on the outer edge of the base plate. Hand thread one of the feet onto the bolt clockwise. Repeat this step for all three feet.
- Turn the assembled Firestorm over and place on a flat level surface. Tighten all three feet clockwise using the included Allen key.
BUILDING REGULATIONS
Download Building Regulations Document J (effective October 2010) below
(Right click link, then select "save file as..")



