7" 45° Bend - Stove Pipe With Door
- Premium Vitreous Enamel
- 45° Bend/Elbow
- Access Door
- Extremely High Resistence to Heat
7" 45° Bend With Door Stove Pipe
Stove Pipe is generally used to connect from your stove or appliance to either Flexible Flue liner or Twin Wall Insulated Flue.
You will need to use an adaptor to connect your Stove pipe
|Construction||Manufactured in accordance with ISO9001-2008 using 1mm low carbon steel|
|Designation||EN 1856-2 T600 N1 D Vm L80060 G525 NM|
|Fuels||Oil, gas and Solid Fuels, for domestic heating appliances|
Vitreous should always be installed 3 x the internal diameter away from any combustible materials.
Stove pipe should only be used as a connection piece and never used externally on any property.
Our stove pipe has a compression fit but we would always advise to use a thin layer of fire cement on each joint.
Download Building Regulations Document J (effective October 2010) below
(Right click link, then select "save file as..")